AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 185

Programming Procedures
Display/Instructions
Step
For a single trunk, do the
4a
following:
1. Specify trunk to copy
from in one of the
following ways (if you are
copying from more than
one trunk, enter the
lowest number):
Trunk number
Slot and port number
Logical ID number
2. Save your entry.
If you get the Station Busy
message, wait for an idle
condition, or exit system
programming and try again
later.
xxx = trunk number entered in
number 1 of Step 4a
3. Specify the trunk you
want to copy to in one of
the following ways:
Trunk number
Slot and port number
Logical ID number
Copy Options for Lines/Trunks
3-94
On the console
Dial [nnn].
Dial [sspp].
Dial #[nnn].
Select Enter.
Dial [nnn].
Dial [sspp],
Dial #[nnn].
On the PC
Type [nnn].
Type [sspp].
Type #[nnn].
[ F 1 0 ]
P r e s s
Type [nnn],
Type [sspp].
Type #[nnn].