AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 537

Programming Procedures
Inside Dial Tone
Use this procedure to set the system dial tone to be either different from or the
same as the outside line/trunk dial tone.
NOTE:
The system dial tone must be the same as the outside dial tone when the
internal dial tone is not recognized by software applications or modems.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary: Inside Dial Tone
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3-446 Inside Dial Tone
Sys Program
Exit
[F1]
press any key
System manager
All
Not required
Form 6f, System Features
Inside dial tone is different from outside dial tone
Inside, outside
No
No
Options InsideDial
Enter E x i t
[F7] [F9] [F1]/[F2]
[F5]
Inside/Outside
[F10] [ F 5 ]