AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 140

Programming Procedures
Procedure: Identify or Remove DLC Operator Positions
Display/Instructions
S t e p
Select the Operator menu.
Select Positions.
Select the DLC position.
If you get the System Busy message,
wait for an idle condition, or exit
system programming and try again
later.
lf you have a DSS attached, go
to Step 5a.
If you do not have a DSS
attached, go to Step 5b.
On the console
Select Operator.
Select Positions.
Select Direct Line.
DLC Operator Positions
On the PC
[ F3 ]
Press
[ F1 ]
Press
[ F1 ]
Press
3-49