AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 653

Programming Procedures
Posted Message
Use this procedure to add or change existing posted messages that let callers
with display telephones know why the person they called does not answer,
Each posted message can have a maximum of 16 characters. Messages 2
through 10 can be changed through programming. Message 1, Do Not Disturb,
cannot be changed.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary: Posted Message
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3-562 Posted Message
Sys Program
Exit
[F1]
press any key
System manager, Integrated Administration
All
Not required
Form 8a, Label Form - Posted Message
First 10 messages
1 - 2 0
No
No
More Labeling PostMessage
no. Enter Drop
Exit E x i t
[PgUp] [F1] [F3]
[Alt] [P]
+ Type message
[F5]
Dial message
Enter message Enter
Type message no.
[F6] [F5]
[F10]
[F5]