AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 291

Programming Procedures
Display/Instructions
Step
xx = number entered in Step 4
n = current telephone number
Erase current telephone
number.
Enter the telephone number to
be assigned as test number to
100D module (up to 12 digits).
To save your entry and assign
test telephone number to
another 100D module:
If next slot number is
sequential
Your previous selection is
saved and next s/et number
appears on line 1 of the screen
in Step 6.
If next slot number is not
sequential
To save your entry when all
entries are complete
To return to System
Programming menu
Test Telephone Number
3-200
On the console
Press Drop.
Dial [n].
Select Next.
Repeat Step 7.
Select Enter.
Repeat Steps 3-7.
Select Enter.
Select Exit two times.
On the PC
[Alt] [P]
Press +
Type [n].
[F9]
Press
Repeat Step 7.
[F10]
Press
Repeat Steps 3-7.
[F10]
Press
[F5]
Press two times.