Entering System Programming - AT&T MERLIN LEGEND Release 2.0 System Programming Manual

Programming Overview

Entering System Programming

The instructions for entering system programming are given below in the same
table format used for the programming instructions in Chapter 3:
the step in the procedure (Step)
the current screen display and the action you take (Display/Instructions)
the selection from the menu (On the console)
the function key to press on the PC (On the PC)
Typically, the results of each step are shown in the screen in the next step
Display/Instructions
Step
Anne
Andre
Jose
Show Number Next Page
Display Main Menu
MENU MODE : Select Feature
Press HOME to Exit
Directory
Messages
Posted Msg
Alarm Clock
Timer
Select System Programming.
Note: Ext Program does not
display if programming console
is a QCC.
On the console
12/24 11:30
Kim
Jorge
Sarah
Press Menu.
Sys Program
Maintenance
Ext Program
Select Sys Program.
On the PC
[ F2 ].
Press
[ F8 ].
Press
Entering System Programming 1-15