AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 502

Programming Procedures
Group Type
Use this procedure to determine whether or not the system automatically logs in
members of a calling group after a power failure. This setting also determines
the type of voice messaging interface when the calling group is used to connect
voice messaging or automated attendant applications. The following are the
possible settings:
Automatic Log Out – Used for calling groups to specify that the system
does not automatically log in calling group members after a power
failure. Calling group members must manually log themselves into the
group.
Automatic Log In – Used for calling groups that consist of fax machines
or data ports (also called data hunt groups) to specify that the system
automatically logs in calling group members after a power failure. See
Chapter 3 for more information, This setting can also be used for calling
groups consisting of telephones.
Integrated VMI - Used when a voice messaging system that requires
special signaling for integrated operation (for example, AUDIX Voice
Power-lS II or MERLIN MAIL Voice Messaging System) is connected to
one or more station jacks assigned to a calling group. The system
automatically logs in the group members after a power failure.
Generic VMI - Used when a voice messaging system that does not need
special signaling (for example, MERLIN Attendant) is connected to one
or more station jacks assigned to a calling group. The system
automatically logs in the group members after a power failure.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Sys Program
Exit
[F1]
press any key
[F5]
Group Type
3-411