AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 411

Programming Procedures
Remote Call Forwarding
Use this procedure to allow or disallow the Remote Call Forwarding capability,
which allows users to forward calls to an outside number.
If a telephone with Remote Call Forwarding has one or more personal lines
assigned, that telephone can be assigned as the principal user, and calls
received on that line are forwarded to outside numbers. (See "Principal User of
Personal Line.")
NOTE:
This feature is not recommended unless you have ground-start trunks. See
"Disconnect Signaling Reliability" and "Hold Disconnect Interval."
E n t e r i n g P r o g r a m m i n g
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary Remote Call Forwarding
Programmable by
Mode
Idle Condition
Planning Form
3-320 Remote Call Forwarding
Sys Program
Exit
[F1]
press any key
System manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct — MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC) - Analog
Form 5b, Direct-Line Console (DLC) - Digital
Form 5c, MFM Adjunct — DLC
Form 5d, Queued Call Console (QCC)
Data Form 2a, Analog Data Station
Data Form 2b, Digital Data Station
[F5]