AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 584

Programming Procedures
Display/Instructions
Step
To change ARS restrictions, do
the following:
1. Select ARS Facility
Restriction Level.
2. Specify the barrier code.
3. Save your entry.
xx = barrier code entered in number 2 of
Step 5b
n = current restriction level
4. Erase the current ARS
FRL.
Assign new ARS FRL.
5.
6. To assign ARS Facility
Restriction Level to
another barrier code:
If next barrier code
number is
sequential
Your previous entry is
saved and next barrier
code number is shown
on line 1.
If next barrier code
number is not
sequential
On the console
Select ARS Restrct.
Dial [nn]
Select Enter.
Press Drop.
Dial [n].
Select Next.
Repeat numbers 4 and
5 in Step 5b.
Select Enter.
Repeat numbers 1-5 in
Step 5b.
Remote Access with Barrier Codes
On the PC
[F4]
Press
Type [nn]
[F10
Press
[Alt] [P]
Press +
Type [n],
[F9]
Press
Repeat numbers 4 and
5 in Step 5b.
[F10]
Press
Repeat numbers 1-5 in
Step 5b.
3-493