AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 339

Programming Procedures
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Entry mode available
†
3-248 Assign Trunks or Pools to Telephones
Behind Switch Mode: Intercom Ring, Intercom Voice,
and Prime Line buttons are assigned to all analog
multiline telephones, MLX telephones (excluding
operator positions), and MFMs connected to MLX
telephones. Two Intercom Ring buttons are assigned to
single-line telephones no outside lines are assigned.
When prime lines are assigned to MLX extensions, lines
are not assigned to MFMs used to connect adjuncts.
Lines for MFMs must be assigned separately.
Hybrid/PBX Mode: System Access Ring, System
Access Voice, and System Access Originate Only
buttons are assigned to all analog multiline telephones,
and MLX telephones (excluding operator positions).
Five Call buttons are assigned to QCC operator
positions. Two System Access Ring buttons and one
System Access Originate Only button are assigned to
single-line telephones. No Personal Line or Pool
buttons are assigned.
Extension numbers
Yes
Yes
†
Extensions
Enter Select trunk range
Enter Exit
†
[F6] [F1]
range Toggle letter G On/Off
Lines/Trunks Dial ext. no.
Toggle LED On/Off
E x i t
[F10]
Type ext. no.
[F10]
Select trunk
[F5] [F5]