AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 222

Programming Procedures
Procedure: Tie Trunk Type
Display/Instructions
Step
Select the Lines and Trunks
menu.
Select Tie Lines.
Select Intype or Outtype.
**** = option name selected in Step 3
Specify the tie trunk in one of
the following ways (if you are
programming a sequence,
enter the lowest number):
Trunk number
Slot and port number
LogicaI ID number
On the console
Select LinesTrunks.
Select TIE Lines.
Select lntype or
Outtype.
Dial [nn].
Dial [sspp].
Dial #[nnn].
Tie Trunk Type
On the PC
[F4]
Press
[F2]
Press
[F2] [F3]
Press or
Type [nn].
Type [sspp].
Type #[nnn].
3-131