Programming with SPM
Step
Installing the SPM Software
Before you install or run SPM, make a backup copy of the SPM diskette (use the
diskcopy or cp command) and store the original in a safe place. Use the
backup copy to run the installation program.
NOTE:
lf your PC does not have a hard disk, you do not need to run the installation
program, Skip to the section entitled "Initializing the SPM Software."
Follow the appropriate instructions in the next sections of this chapter for
installing SPM on a DOS or UNIX system PC.
DOS Installation
If you are installing a new version of SPM, the new files will overwrite your
current SPM files. You do not need to remove them.
To install SPM on the PC's hard disk, follow these steps:
1. With the system prompt (c:>) on your screen, insert the backup copy of
the SPM diskette into Drive A.
Installing the SPM Software
2-32
Instructions
Display
Press
If the programming function you want to
perform does not appear on the screen,
press
s c r e e n .
You can select any option by pressing one
of the function keys.
[ F1 ]
to select Sys Program.
[ PgUp ]
(More) to see the second
Need help?
Do you have a question about the MERLIN LEGEND Release 2.0 and is the answer not in the manual?