AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 75

Programming with SPM
Console Window Language
By default, the language used in the 7 x 24 console simulation window is the
language specified in the ams.cfg file. However, the SPM user can select a
different language for this window for the duration of the current session, as
follows:
Step
I
Maintenance
CAUTION:
This option is for use by qualified technicians only. Maintenance
procedures are provided in the documentation for qualified
technicians.
Monitor
CAUTION:
This option is for use by your technical support organization only.
Pass-Thru
The Pass-Thru option allows qualified service personnel to administer lS-II/III
applications on a remote PC by establishing a remote connection with the
control unit to which the IS-II/III PC is directly connected. Figure 2-6 illustrates
the relationship of the SPM PC, the communications system control unit, and the
lS-II/III PC!
Display Instructions
Select Language by pressing
Language menu appears as shown in
Step 2. The current language selection is
highlighted.
Highlight the new language selection. To
I
highlight English, press
French, press
press
selection, press
[ F10 ].
[ F1 ].
To highlight
[ F2 ]
. To highlight Spanish
[ F3 ].
To complete the language
[ F10 ]
( Enter ).
Using SPM
The
2-25