AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 179

Programming Procedures
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary: Trunks to Pools Assignment
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Entry mode available
†
3-88 Trunks to Pools Assignment
Sys Program
press any key
System manager
Hybrid/PBX
Trunk idle
Form 2c, System Numbering — Trunk Jacks
All loop-start trunks are assigned to the Main Pool
(factory-set extension number 70); all tie trunks are
assigned to the pool with the factory-set extension
number 891; no factory-set extension assigned to
ground-start trunks.
Line numbers
Yes
Yes
† LinesTrunks
Enter Select block of lines
Enter Exit
†
[F4] [F9]
Select block of lines
[F10] [F5]
Exit
[F1] [F5]
Pools Dial pool dial-out code
Toggle LED On/Off
E x i t
Type pool dial-out code
Toggle letter R On/Off
[F5]
[F10]