AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 666

Programming Procedures
—
—
—
—
—
—
—
—
—
—
—
—
—
If you select the All option, keep in mind that the reports take several
minutes to print. You may want to schedule use of the printer during off-
peak hours.
If you select a report for which there is no information, the report header
still prints.
Print reports if you cannot backup your system programming
information.
Do not print reports if your system must handIe more than 100 calls per
hour.
If you are printing from the console, your printer must be connected to
the SMDR port. If you are programming on a PC with SPM, you have the
following choices:
—
—
print reports on the PC printer
—
save reports (on hard disk or floppy)
—
See Chapter 2, "Programming With SPM," for details.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Allowed Lists Assigned to Extensions
Disallowed Lists
Disallowed Lists Assigned to Extensions
Automatic Route Selection
• Tables
Extension Directory
System Directory
Group Page
Extension Information
Group Coverage
Group Calling
Night Service
Call Pickup Groups
Error Logs
print reports on the SMDR printer (if available)
view reports (browse)
Sys Program
press any key
Exit
[F1] [F5]
Printing System Reports 3-575