AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 379

Programming Procedures
Display/Instructions
Step
xxxx = number entered in Step 7
Specify the telephone you want
to program in one of the
following ways (if you are
programming a sequence,
enter the lowest number):
Extension number
Slot and port number
Logical ID number
DSS
The red LED indicates the following:
on = assign message waiting
indication to an extension
extension
off = remove message waiting
indication from an
extension
To remove message-
waiting indication from
telephone
To assign message-waiting
indication to telephone and
assign telephones to
receive message-waiting
indication for another fax
If next extension number Select Next.
is sequential
Your previous entry is saved
and next extension number is
shown on line 1 of screen in
Step 9.
If next extension number Select Enter.
is not sequential
3 - 2 8 8 F a x
On the console
Dial [nnnn].
Dial [sspp].
Dial #[nnn].
Press DSS button.
Select Delete.
Repeat Step 9.
Repeat Steps 6-9.
On the PC
Type [nnnn].
Type [sspp].
Type #[nnn].
[F8]
Press
[F9]
Press
Repeat Step 9.
[F10]
Press
Repeat Steps 6-9.