AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 360

Programming Procedures
Analog Multiline Telephones without Built-in
Speakerphones
Use this procedure to identify those telephones that do not have the built-in
speakerphone or Hands Free Answer on Intercom (HFAI) capability for analog
multiline telephones with flat membrane buttons. The models that must be
identified are 5-Button, 10-Button, 34-Button, and 34-Button Deluxe analog
multiline models with flat membrane buttons.
Keep the factory setting for analog multiline models with raised plastic buttons,
including the following models: 10-Button HFAI, 34-Button with speakerphone
(SP-34), 34-Button with speakerphone and display (SP-34D), BIS-10, BIS-22,
BIS-34, BIS-22D, and BIS-34D.
This procedure is not needed for MLX or single-line telephones.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary: Analog Multiline Telephones without Built-in
Speakerphones
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Analog Multiline Telephones without Built-in Speakerphones
Sys Program
Exit
[F1]
press any key
System manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 5a, Direct-Line Console (DLC) - Analog
Data Form 2a, Analog Data Stations
All models of analog multiline telephones (except the
analog multiline display console) have the BIS/HFAl
capability
[F5]
3-269