Mlx Display Telephones - AT&T MERLIN LEGEND Release 2.0 System Programming Manual

Programming Special Characters

MLX Display Telephones

When you program Personal Directory listings, Auto Dial buttons, or Personal
Speed Dial codes, you are storing a sequence of numbers to be dialed
automatically.
Some dialing sequences need special characters. For example, you would
press Hold to insert a pause in a dialing sequence after a dial-out code to allow
the system to seize an outside line before dialing the number. A pause can also
be used to separate a phone number from an extension number.
Table G-4 Special Characters for MLX Display Telephones
Press... See...
D r o p s
Hold p
Conf f
#
##
#
#
Means...
Stop. Halts dialing sequence to allow for system
response.
Pause. Inserts 1.5 sec. pause in dial sequence.
Multiple consecutive pauses allowed.
Flash. Sends switchhook flash. Must be first entry
in sequence.
End of Dialing for Extension Programming only.
Used at the end of a dialing sequence to indicate
you have finished dialing or to separate one group
of dialed digits from another, for example, account
codes from number dialed.
End of Dialing. Used to signal end of dial
sequences or to separate group digits, for example,
account code from number dialed.
MLX Display Telephones G - 5