AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 414

Programming Procedures
Display/Instructions
Step
If you have a DSS attached, do
the following:
Check red LEDs for feature
status.
The red LED indicates the following:
on= remote call forwarding is
assigned to telephone
off = remote call forwarding is not
assigned to telephone
If you do not have a DSS
attached, do the following:
1. Specify the telephone
you want to program in
one of the following
ways:
Extension number
Slot and port number
Logical ID number
2. To assignor remove
remote call forwarding to
extension entered in
number 1 of Step 4b
To return to System
Programming menu
On the console
Toggle the LED On/Off,
as required.
Dial [nnnn]
Dial [sspp]
Dial # [nnn]
Select Enter or
Delete.
Select Exit two times.
Remote Call Forwarding
On the PC
Type [nnnn]
Type [sspp]
Type # [nnn]
[F10] [F8]
Press or
[F5]
Press two times.
3-323