AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 473

Programming Procedures
Display/Instructions
Step
Specify the extension of the
calling group (if you are
programming a sequence,
enter the lowest number).
Save your entry.
xxxx = number entered in Step 5
Specify the trunk or pool you
want to program in one of the
following ways:
Line/Trunk number
Slot and port number
Logical ID number
To remove line/trunk or pool
from calling group
To assign Iine/trunk or pool to
calling group and assign
lines/trunks or pools to another
calling group:
If next group extension
number is sequential
Your previous entry is saved
and nexx group extension
number is shown on line 1 of
screen shown in Step 7.
If next group extension
number is not sequential
3-382 Group Calling Trunk or Pool Assignments
On the console
Dial [nnnn]
Select Enter.
Dial [nnnn]
Dial [sspp]
Dial # [nnn]
Select Delete.
Select Next.
Repeat Step 7.
Select Enter.
Repeat Steps 4-7.
On the PC
Type [nnnn]
[F10]
Press
Type [nnnn]
Type [sspp]
Type # [nnn]
[F8]
Press
[F9]
Press
Repeat Step 7.
[F10]
Press
Repeat Steps 4-7.