AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 54

Programming with SPM
Table 2-1. - Continued
PC Key
[ Alt ] + [ U ]
[ Ctrl ] + [ F1 ]
[ Ctrl ] + [ F5 ]
[ Ctrl ] + [ F8 ]
[ Ctrl ] + [ F9 ]
[ ]
[ Backspace ]
[ Delete ]
2-4 Introduction to SPM
SPM Function
Console
N / A Convert: Convert a backup file from an
earlier release to Release 2.0 format.
Help: Display a help screen about SPM
N / A
operations. To exit from Help, press
[ End ].
N / A Reset: Reset the communications port.
For example, if the information on the
screen is garbled, try exiting from and
then recentering the screen. If the
screen remains garbled, use
[ F5 ]
the SPM Welcome screen. Note that
using
connection.
Browse: View print reports saved with
N / A
Print Opts.
Escape to shell. To use this key
N / A
sequence, you must set DEBUG=1 in
the SPM configuration file ams. cfg.
You can then use this key sequence to
execute DOS (or UNIX system)
commands. To return to SPM, type
e x i t ,
[
The
E n t e r
instead of
appears as a choice in the 7 x 24
console simulation window.
Backspace The Backspace key on your PC can be
used instead of
when it appears as a choice in the
7 x 24 console simulation window.
[ Delete ]
D e l e t e The
used instead of
appears as a choice in the 7 x 24
console simulation window.
[ Ctrl ] +
to clear the screen and return to
[ Ctrl ] + [ F5 ]
drops the modem
]
key on your PC can be used
[ F10 ]
(Enter) when Enter
[ F9 ]
(Backspace)
key on your PC can be
[ F8 ]
(Delete) when it
Continued on next page