AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 366

Programming Procedures
Procedure: Analog Multiline Telephones with Voice Announce to
B u s y
Step Display/Instructions
Select the Extensions menu.
Select Voice Signal.
Specify extension of telephone
you want to program in one of
the following ways:
Extension number
Slot and port number
Logical lD number
DSS
if DSS is attached, check the
status of the feature.
The red LED indicates the following:
on = assigns pairing for Voice
Announce to busy
off = removes pairing for Voice
Announce to busy
Red LED autornatically goes on for
other extension in pair.
Analog Multiline Telephones with Voice Announce to Busy
On the console
Select Extensions.
Select VoiceSignl.
Dial [nnnn]
Dial [sspp]
Dial #[nnn]
Press DSS button
Toggle the LED On/Off,
as required.
On the PC
[F6]
Press
[F10]
Press
Type [nnnn]
Type [sspp]
Type #[nnn]
3-275