AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 323

Programming Procedures
Display/Instructions
Step
x = number entered in number 1 of Step 6c
3. Specify the type of
number.
4. To save your selection
and assign number type
to another table:
If next table is
sequential
Your previous selection is
saved, and next table
number appears on line
1.
If next table is not
sequential
To save your entry when all
entries are complete
For Delete Digits, do the
following:
1. Enter the table number
(if you are programming
a sequence, enter lowest
number).
3-232 Special Services Tables
On the console
Select National or
International.
Select Next.
Repeat number 3 in
Step 6c.
Select Enter.
Repeat Steps 5 and 6c.
Select Enter.
Dial [n].
On the PC
[F1] [F2]
Press or
[F9]
Press
Repeat number 3 in
Step 6c.
[ F 1 0 ]
Press
Repeat Steps 5 and 6c.
[F10]
Press
Type [n].