AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 122

Programming Procedures
Display/Instructions
Step
Select an item for
renumbering.
= option name selected in Step 4
Specify the old extension in one
of the following ways (if you are
programming a sequence enter
the lowest number):
Extension number
Slot and port number
Logical ID number
DSS
If you get the Station Busy message,
for an idle condition, or exit
wait
system programming and try again
later.
Save your entry.
*** = option name selected in Step 4
xxxx = number entered in Step 5
Specify the new extension in
one of the following ways (if you
are programming a sequence,
enter the lowest number):
Extension number
Slot and port number
Logical ID number
DSS
On the console
Press the button next to
your selection.
Dial [nnnn].
Dial [sspp].
Dial #[nnn].
Press DSS button.
Select Enter.
Dial [nnnn].
Dial [sspp].
Dial #[nnn].
Press DSS button.
Single Renumbering
On the PC
Press the function key
next to your selection.
Type [nnnn].
Type [sspp].
Type #[nnn].
[ F10 ]
Press
Type [nnnn].
Type [sspp].
Type #[nnn].
3-31