AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 732

General Feature Use and Telephone Programming
Table C-4. — Continued
Step
4
Select the feature.
If the feature name is on the
display:
If the feature name is not on the
display:
To move through the list of
features page by page,
or
To jump to the screen that
displays the feature name,
5 Respond to any additional
prompts on the display.
6 End programming.
To return to the Home screen:
To return to the Menu screen:
NOTE:
MLX display telephones can also be programmed using the method
described for MLX-10 telephones. For example, the programming mode
can be entered by pressing the Feature button and dialing 00, then
referring to the display to continue the programming process. or, enter
programming via the display and then dial a programming code to select
the feature rather than selecting it from the display.
C-12 Telephone Programming
Action
Press the button next to or below the
name of the feature to be programmed.
Press More.
Select Find Feature from the
display.
Select the range of letters from the
display that corresponds to the first
letter of the feature name (for example,
if the feature begins with A, select
If the feature is not displayed on the
page that you jumped to, press More.
When you find the feature you want,
press the button next to or below it.
Select appropriate prompt (for example,
select On or Off to turn Inside
Coverage on or off), and/or enter
required information (for example, dial a
phone number for Auto Dial).
Select Enter.
Press Home or lift and replace the
handset.
Press Menu.
).
ABC