AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 394

Programming Procedures
Procedure: Pool Dial-Out Code
Display/Instructions
Step
Select the Extensions menu.
Select Dial-Out Code.
Specify the telephone in one of
the following ways (if you are
programming a sequence,
enter the lowest number):
Extension number
Slot and port number
Logical lD number
DSS
If DSS is attached, check the
status of the feature.
The red LED indicates the following:
on= pool dial-code is assigned
off = pool dial-code is not assigned
On the console
Select Extensions.
Select Dial OutCd.
Dial [nnnn]
Dial [sspp]
Dial # [nnn]
Press DSS button.
Toggle the LED On/Off,
as required.
Pool Dial-Out Code
On the PC
[F6]
Press
[F3]
Press
Type [nnnn]
Type [sspp]
Type #[nnn]
3-303