AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 246

Programming Procedures
Display/Instructions
Step
x = block entered in Step 4
Specify immediate start or
wink start.
To save your selection and specify
type for the other trunk block
If next block number is
sequential
Your previous entry is saved and
the next trunk number is shown
on line 1 of the screen in
Step 6.
If next block number is
not sequential
To save your entry when all entries
are complete
To return to System
Programming menu
On the console
Select Immed or Wink.
Select Next.
Repeat Step 6.
Select Exit.
Repeat Steps 3-6.
Select Enter.
Select Exit two times. Press
DID Trunk Type
On the PC
[F1] [F2]
Press or
[F9]
Press
Repeat Step 6.
[F5]
Press
Repeat Steps 3-6.
[F10]
Press
[F5]
two times.
3-155