AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 121

Programming Procedures
Procedure: Single Renumbering
Display/Instructions
S t e p
Select the System Renumbering
menu,
Select the Single Renumbering
screen.
If you get the System Busy message,
wait for an idle condition, or exit
system programming and try again later
If the item you want to
renumber is not displayed, go
to the second screen of the
System Renumber menu.
3-30 Single Renumbering
On the console
Select SysRenumber.
Select Single
Press More.
On the PC
[ F2 ]
Press
[ F2 ]
Press
[ PgUp ]
Press