AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 346

Programming Procedures
Display/Instructions
Step
Specify the telephone you want
to copy from in one of the
following ways (if you are
copying from more than one
telephone, enter the lowest
number):
Extension number
Slot and port number
Logical ID number
DSS
If the DSS is attached, check
the status of the feature.
The red LED indicates the following:
on= extension is to be copied from
off = extension will not be copied
from
Save your entry.
To copy line assignments to a
single telephone, go to Step 6a.
To copy line assignments to a
block of telephones, go to Step
6b.
On the console
Dial [nnnn].
Dial [sspp].
Dial # [nnn].
Press DSS button.
Toggle the LED On/Off,
as required.
Select Enter.
Copy Line/Trunk Assignments
On the PC
Type [mm].
Type [sspp].
Type # [nnn].
[F10]
Press
3-255