AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 458

Programming Procedures
G r o u p P a g i n g
Use this procedure to assignor remove a telephone from a paging group,
consisting of telephone users who hear common announcements over the
telephone speakerphone. Only MLX telephones and analog multiline
telephones with speakerphones can be members of a paging group.
A maximum of six paging groups with a maximum of 10 telephones per group is
allowed. A seventh paging group, called the Page All group, is not limited and
includes all telephones connected to the system. Telephones cannot be added
to or removed from the Page All group.
To reassign a telephone to a new paging group, just assign it; the telephone is
automatically removed from its old paging group.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary Group Paging
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Sys Program
Exit
[F1]
press any key
System manager
All
Not required
Form 6c, Group Paging
Not applicable
Extension number
Yes
No
Extensions More
group no. Enter
E x i t
[F6] [PgUp] [F2]
[F10]
Type ext. no.
[F5]
Group Page Dial paging
Dial ext. no. Enter
Type paging group no.
[F10] [F5] [F5]
Group Paging
Exit
3-367