AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 223

Programming Procedures
Display/Instructions
Step
Save your entry.
xxxx = trunk entered in Step 4
**** = option name selected in Step 3
Select the tie trunk type.
To save your selection and
specify type for another tie
trunk:
If next tie-trunk number
is sequential
Your previous entry is saved,
and next tie-trunk number is
shown on line 1 of the screen
in Step 6.
If next tie-trunk number
is not sequential
To save your entry when all
entries are complete
To return to System
Programming menu
3-132 Tie Trunk Type
On the console
Select Enter.
Select Wink, Delay,
Immed, or Auto.
Select Next.
Repeat Step 6.
Select Enter.
Repeat Steps 3-6.
Select Enter.
Select Exit two times.
On the PC
[F10]
Press
[F1], [F2],
Press
[F3], [ F 4 ]
or
[F9]
Press
Repeat Step 6.
[F10]
Press
Repeat Steps 3-6.
[F10]
Press
[F5]
Press two times.