AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 354

Programming Procedures
Display/Instructions
Step
To program an extension, do
the following:
1. Select extension
programming
2. Specify telephone in one
of the following ways:
Extension number
Slot and port number
Logical ID number
DSS
3. Save your entry
xx = extension entered in number 2 of Step 4a
4. Start centralized
telephone programming,
xx . extension entered in number 2 of Step 4a
On the console
Select Program Ext.
Dial [nnnn].
Dial [sspp].
Dial # [nnn].
Press DSS button.
Select Enter.
Select Start.
Assign Intercom or System Access Buttons
On the PC
[F1]
Press
Type [nnnn].
Type [sspp].
Type # [nnn].
[F10]
Press
[F10]
Press
3-263