AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 175

Programming Procedures
Display/Instructions
S t e p
Specify QCC operator to
receive calls in one of the
following ways:
Extension number
Slot and port number
Logical lD number
DSS
The green LED indicates the following:
on = operator receiving calls
off = operator not receiving calls
Save your entry.
xxxx = extension number entered in Step 4
To specify a single line/trunk go
to Step 7a.
To specify a block of
lines/trunks, go to Step 7b.
7a For a single line/trunk, do the
following:
1. Specify entry mode.
xxxx = extension number entered in Step 4
3-84 QCC Operator to Receive Calls
On the console
Dial [nnnn].
Dial [sspp].
Dial #[nnn].
Press DSS button.
Toggle the LED On/Off,
as required.
Select Enter.
Select Entry Mode.
On the PC
Type [nnnn].
Type [sspp].
Type #[nnn].
Toggle the letter G
On/Off, as required.
[F10]
Press
[F6]
Press