AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 214

Programming Procedures
Procedure: Channel Service Unit
Display/Instructions
Step
Select the Lines and Trunks
menu.
Select Loop Start/Ground
Start/DS1.
Specify the slot number in the
control unit that contains the
100D module.
Save your entry.
Select Channel Unit.
On the console
Select LinesTrunks.
Select LS/GS/DS1.
Dial [nn].
Select Enter.
Select ChannelUnit.
Channel Service Unit
On the PC
[F4]
Press
[F1]
Press
Type [nn].
[F10]
Press
[F8]
Press
3-123