Scope-Policy - Juniper JUNOS OS 10.3 - SOFTWARE Manual

scope-policy

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
scope-policy [ policy-names ];
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-options multicast]
NOTE: You can configure a scope policy at these two hierarchy levels only.
You cannot apply a scope policy to a specific routing instance, because all
scoping policies are applied to all routing instances. However, you can apply
the statement to a specific routing instance at the
scope
routing-instances routing-instance-name routing-options multicast]
logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Apply policies for scoping. The policy must be correctly configured at the
policy-options policy-statement
—Name of one or more multicast scope policies.
policy-names
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
scope on page 1958
Using a Scope Policy for Multicast Scoping
Chapter 73: Configuration Statements for Layer 3 Protocols
hierarchy level.
hierarchy level.
[edit
or [edit
edit
1959