Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1048

Complete Software Guide for Junos
Results
944
®
OS for EX Series Ethernet Switches, Release 10.4
[edit interfaces]
user@Host-A# set ae0 aggregated-ether-options minimum-links 2
Specify the number of links that need to be present for the
3.
:
up
[edit interfaces]
user@Host-A# set ae1 aggregated-ether-options minimum-links 2
Specify the media speed of the
4.
[edit interfaces]
user@Host-A# set ae0 aggregated-ether-options link-speed 10g
Specify the media speed of the
5.
[edit interfaces]
user@Host-A# set ae1 aggregated-ether-options link-speed 10g
Specify the interface ID of the uplinks to be included in LAG
6.
[edit interfaces]
user@Host-A# set xe-0/1/0 ether-options 802.ad ae0
user@Host-A# set xe-1/1/0 ether-options 802.ad ae0
Specify the interface ID of the uplinks to be included in LAG
7.
[edit interfaces]
user@Host-A# set xe-0/1/1 ether-options 802.ad ae1
user@Host-A# set xe-1/1/1 ether-options 802.ad ae1
Specify that LAG
ae0
8.
[edit interfaces]
user@Host-A# set ae0 unit 0 family inet address 192.0.2.0/25
Specify that LAG ae1
9.
[edit interfaces]
user@Host-A# set ae1 unit 1 family inet address 192.0.2.128/25
Display the results of the configuration:
[edit]
chassis {
aggregated-devices {
ethernet {
device-count 2;
}
}
}
interfaces {
ae0 {
aggregated-ether-options {
link-speed 10g;
minimum-links 2;
}
unit 0 {
family inet {
address 192.0.2.0/25;
link:
ae0
link:
ae1
belongs to the subnet for the employee broadcast domain:
belongs to the subnet for the guest broadcast domain:
ae1 LAG interface to be
:
ae0
:
ae1
Copyright © 2010, Juniper Networks, Inc.