Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1065

Meaning
Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
6 (FPC 6) Prsnt stu901
7 (FPC 7) Prsnt vwx234
8 (FPC 8) Prsnt yza567
9 (FPC 9) Prsnt bc7890
The output shows that all members listed in the preprovisioned configuration file are
connected to the Virtual Chassis configuration. It confirms that SWA-0 (member
functioning as the master of the Virtual Chassis configuration, which was the intention
of the configuration procedure. The other switch configured with the
(SWA-5) is functioning as the backup. The
of the member VCPs.
Verifying That the Dedicated VCPs and Uplink VCPs Are Operational
Verify that the dedicated VCPs interconnecting the member switches within each wiring
closet and the uplink module VCPs interconnecting the member switches across wiring
closets are operational.
Display the VCP interfaces:
user@SWA-0> show virtual-chassis vc-port all-members
fpc0:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
1/0 Configured
fpc1:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
fpc2:
--------------------------------------------------------------------------
Interface Type
or
PIC / Port
vcp-0 Dedicated
vcp-1 Dedicated
1/0 Configured
Chapter 38: EX4200 Virtual Chassis—Configuration Examples
ex4200-24t 0 Linecard
ex4200-24t 0 Linecard
ex4200-24t 0 Linecard
ex4200-48p 0 Linecard
displays the interconnections
Neighbor List
Status Speed Neighbor
(mbps) ID
Up
Up
Up
Status Speed Neighbor
(mbps) ID
Up
Up
Status Speed Neighbor
(mbps) ID
Up
Up
Up
9 vcp-1
0 1/0
7 vcp-0
5 vcp-1
8 vcp-0
6 vcp-1
2 1/0
9 vcp-0
7 vcp-1
5 vcp-0
8 vcp-1
) is
0
routing-engine role
Interface
Interface
Interface
961