Configuration
CLI Quick
Configuration
Copyright © 2010, Juniper Networks, Inc.
Figure 22: Traffic Redirected by Fast Failover After VCP Link Failures in
a Topology with Multiple Rings
This example shows how to enable fast failover on uplink module VCPs.
The topology for this example consists of six switches:
Six EX4200-24T switches, four of which have an SFP uplink module installed (switches
1, 3, 4, and 6)
To configure the fast failover feature on uplink module VCPs:
To configure fast failover on all SFP uplink module VCPs, copy the following command
and paste it into the terminal window on switch 1:
Chapter 38: EX4200 Virtual Chassis—Configuration Examples
965