Novell NETWARE 6-DOCUMENTATION Manual page 3664

TSA6OO-X-88: The NFS name space is not supported. This information will not be
restored.
Source:
Explanation:
Action:
TSA6OO-X-89: The full paths data set format is invalid. Error code: code.
Source:
Explanation:
Action:
TSA6OO-X-90: The type name space is not supported.
Source:
Explanation:
Action:
TSA6OO-X-91: Error code occurred while the program attempted to set the type name
space name for data_set_name.
Source:
Explanation:
Action:
TSA6OO.NLM
This file or directory contains information specific to NFS that will not be
restored.
If NFS information is required, restore to a volume with NFS support or load
NFS support on the selected volume. If the NFS information is not needed,
continue the restore session.
TSA6OO.NLM
An invalid full path was detected by TSA6OO.
Make sure the full path is specified; it must contain volume, directory,
filename, and file separators for the specified name space. For information
about a specific error code, search the
(http://www.novell.com/documentation/lg/nwec/docui/index.htm).
TSA6OO.NLM
The specified name space type is invalid, or not supported on this volume.
Specify a valid name space type. If necessary, load name space support for the
specified volume.
TSA6OO.NLM
TSA6OO could not set the name space name for the indicated name space
type.
Make sure the name space name and name space type are valid. If the problem
persists, contact a Novell support provider. For information about a specific
error code, search the
www.novell.com/documentation/lg/nwec/docui/index.htm).
Error Codes online documentation
Error Codes online documentation (http://
TSA600 Messages 713