Novell NETWARE 6-DOCUMENTATION Manual page 3712

016: The node address was incorrectly specified in the NET.CFG file.
Source:
Explanation:
Action:
017: An invalid keyword was specified in NET.CFG on line number.
Source:
Explanation:
Action:
018: The frame type specified in the NET.CFG is not supported.
Source:
Explanation:
Action:
019: An invalid TRXNET node address is specified in NET.CFG. The MLID modified the
incorrect address bits.
Source:
Explanation:
Action:
025: You cannot load MSM31X on a NetWare 3.10 server.
Source:
Explanation:
Action:
TRXNET-DOS.LAN
The node address override in the NET.CFG file is too long.
Edit the NET.CFG file and correct the node address. The node address must
be less than or equal to 12 hex digits.
TRXNET-DOS.LAN
The key word on the line indicated was not recognized.
Edit the NET.CFG file and correct the spelling of the keyword.
TRXNET-DOS.LAN
The frame type specified with the FRAME keyword is not supported by the
driver.
Edit the NET.CFG file and fix frame type.
TRXNET-DOS.LAN
The node address specified in the NET.CFG file has set reserved bits.
Edit the NET.CFG file and correct the node address.
NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
The computer attempted to load MSM31X.NLM on a NetWare 3.10 server.
MSM31X.NLM will run only on a NetWare 3.11 server.
Load a version of the Media Support Module (MSM) that will run on a
NetWare 3.10 server, or upgrade the server to NetWare 3.11 or later server.
Shared Messages for LAN Drivers 761