Novell NETWARE 6-DOCUMENTATION Manual page 3715

066-Adapter 1: The cable might be disconnected on the board.
Source:
Possible Cause:
Action:
067: The group bit in the node address override was cleared.
Source:
Explanation:
068: The local bit in the node address override was set.
Source:
Possible Cause:
071: The matching virtual adapter could not be found.
Source:
Possible Cause:
Action:
072: A resource tag is unavailable.
Source:
Possible Cause:
Action:
764 System Messages
NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN
The cable is disconnected, or heavy traffic on the wire is delaying a packet
from being sent.
If the problem persists, check the cable, or consider adding more networks to
decrease LAN traffic.
NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
This informational message informs you that you entered a node address with
the Group address bit set. The Topology Specific Module (TSM) cleared it.
NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
This informational message inform you that you entered a node address
without the local bit being set and that the Topology Specific Module (TSM)
set it.
NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
A new frame was being added to an existing network board, but the Media
Support Module (MSM) could not locate a previous network board to link it
with.
Obtain the latest version of MSM.NLM.
NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
The server does not have enough available memory. NetWare cannot allocate
memory for a resource tag.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
Freeing Server Memory
Guide.