Novell NETWARE 6-DOCUMENTATION Manual page 3689

TSANDS-X-288: The object ID or name that was backed up does not match the current
object ID or name.
Source:
Explanation:
Action:
TSANDS-X-289: The Open mode option is out of range (less than 0 or greater than 23).
Source:
Explanation:
Action:
TSANDS-X-290: One or more of the parameters is null or invalid.
Source:
Explanation:
Action:
TSANDS-X-291: An invalid path was used.
Source:
Explanation:
Action:
TSANDS-X-292: The scan type is out of range (less than 0 or greater than 31).
Source:
Explanation:
Action:
738 System Messages
TSANDS.NLM
The object ID or name for the restore does not match the object ID or name
for the backup. Restore is probably being performed on a different server than
the server that was used for the backup. This results in an object on both
servers with a different ID.
None. This message is for information only.
TSANDS.NLM
An invalid open mode option was specified.
Specify a range within allowable parameters.
TSANDS.NLM
Invalid parameters were specified.
Check the parameters and replace any null or invalid ones.
TSANDS.NLM
The path is invalid for the specified name space.
Make sure a valid path for the desired name space type is specified. Make sure
the user has appropriate user access rights.
TSANDS.NLM
An invalid scan type was specified.
Correct the scan type and try again.