Show Wi-Fi Client Status And Statistics - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

7. Save the configuration and apply the change:

(config network wireless client new_client)> save

Configuration saved.

8. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Show Wi-Fi client status and statistics

You can show summary status for all Wi-Fi clients, and detailed status and statistics for individual Wi-Fi

1. Log into the TX54 WebUI as a user with Admin access.

2. On the main menu, click Status.

3. Under Connections, click Wi-Fi > Clients.

Command line

Show summary of Wi-Fi clients

To show the status and statistics for Wi-Fi client, use the

1. Log into the TX54 command line as a user with Admin access.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the Admin CLI prompt, type show wifi client:

> show wifi client

3. To view information about both active and inactive clients, include the all parameter:

> show wifi client all

Show detailed status and statistics of a specific Wi-Fi client

To show a detailed status and statistics of a Wi-Fi client, use the show wifi client name name

TX54 User Guide

Show Wi-Fi client status and statistics

-----------------

91:fe:86:d1:0e:81

-----------------

91:fe:86:d1:0e:81