Show Openvpn Client Status And Statistics - Digi IX10 User Manual

Hide thumbs Also See for IX10:

Table of Contents

Virtual Private Networks (VPN)

4. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Show OpenVPN client status and statistics

You can view status and statistics for OpenVPN clients from either web interface or the command line:

1. Log into the IX10 WebUI as a user with Admin access.

2. On the menu, select Status > OpenVPN > Clients.

The OpenVPN Clients page appears.

3. To view configuration details about an OpenVPN client, click the  (configuration) icon in the

upper right of the OpenVPN client's status pane.

Command line

1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10

local command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. To display details about all configured OpenVPN clients, type the following at the prompt:

> show openvpn client all

---------------

OpenVPN_Client1

OpenVPN_Client2

3. To display details about a specific client:

> show openvpn client name OpenVPN_client1

IX10 User Guide

: OpenVPN_client1

: 123.122.121.120

: 120.121.122.123

: 192.168.30.1/24