Show Wi-Fi Client Status And Statistics - Digi LR54 User Manual

Wi-Fi
Channel Width
Radio
BSSID
Client
-----------------
cc:c0:78:34:d5:a2
>

Show Wi-Fi client status and statistics

You can show summary status for all Wi-Fi clients, and detailed status and statistics for individual Wi-
Fi clients.

Web
1. Log into the LR54 WebUI as a user with Admin access.
2. On the main menu, click Status.
3. Under Connections, click Wi-Fi > Clients.

Command line
Show summary of Wi-Fi clients
To show the status and statistics for Wi-Fi client, use the
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type show wifi client:
> show wifi client
Client
---------
my_client
>
3. To view information about both active and inactive clients, include the all parameter:
> show wifi client all
Client
---------
my_client
client2
>
Show detailed status and statistics of a specific Wi-Fi client
LR54 User Guide
:
: wifi1
: 01:41:D1:14:36:37
Signal RX Bytes
------ -__-----
-68 260997
Enabled SSID
------- --------
true my_SSID
Enabled SSID Status
------- -------- ------
true my_SSID up
true SSID2 down
Show Wi-Fi client status and statistics
TX Bytes Uptime
-------- ------
279481 801
show wifi client
Status Signal MAC Address
------ ------ -----------------
up -43 91:fe:86:d1:0e:81
Signal MAC Address
------ -----------------
-43 91:fe:86:d1:0e:81
command.
311