Show Openvpn Client Status And Statistics - Digi IX40 User Manual

Virtual Private Networks (VPN)
Log into the IX40 WebUI as a user with full Admin access rights.
1. On the menu, select Status > OpenVPN > Servers.
The OpenVPN Servers page appears.
2. To view configuration details about an OpenVPN server, click the ­ (configuration) icon in the
upper right of the OpenVPN server's status pane.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To display details about all configured OpenVPN servers, type the following at the prompt:
> show openvpn server all
Server
--------------- ------ ---- -------- --------------- ----
OpenVPN_server1 true tun internal 192.168.30.1/24 1194
OpenVPN_server2 false tun internal 192.168.40.1/24 1194
>
3. To display details about a specific server:
> show openvpn server name OpenVPN_server1
Server
Enable
Type
Zone
IP Address
Port
Use File
Metric
Protocol
First IP
Last IP
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show OpenVPN client status and statistics

You can view status and statistics for OpenVPN clients from either web interface or the command line:
É
Web
IX40 User Guide
Enable Type Zone IP Address
: OpenVPN_server1
: true
: tun
: internal
: 192.168.30.1/24
: 1194
: true
: 0
: udp
: 80
: 99
Port
OpenVPN
453