Show Wi-Fi Client Status And Statistics - Digi IX20-WAG4 User Manual

Wi-Fi
SSID
Security
Channel
Channel Width
Radio
BSSID
Client
-----------------
cc:c0:78:34:d5:a2
>

Show Wi-Fi client status and statistics

You can show summary status for all Wi-Fi clients, and detailed status and statistics for individual Wi-
Fi clients.

WebUI
1. Log into the IX20 WebUI as a user with Admin access.
2. On the main menu, click Status.
3. Under Connections, click Wi-Fi > Clients.

Command line
Show summary of Wi-Fi clients
To show the status and statistics for Wi-Fi client, use the
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type show wifi client:
> show wifi client
Client
---------
my_client
>
3. To view information about both active and inactive clients, include the all parameter:
> show wifi client all
Client
---------
my_client
IX20 User Guide
: my_AP
: none
:
:
: wifi
: 01:41:D1:14:36:37
Signal RX Bytes
------ -__-----
-68 260997
Enabled SSID
------- --------
true my_SSID
Enabled SSID Status
------- -------- ------
true my_SSID up
Show Wi-Fi client status and statistics
TX Bytes Uptime
-------- ------
279481 801
show wifi command.
Status Signal MAC Address
------ ------ -----------------
up -43 91:fe:86:d1:0e:81
Signal MAC Address
------ -----------------
-43 91:fe:86:d1:0e:81
228