Safety Notes - Safran WR-Z16 User Manual

2.5

Safety Notes

Safety: Symbols Used
Table 2-7:
SAFETY: Before You Begin Installation
CHAPTER •
2 WR-Z16 User Manual Rev. v5.0
Safety symbols used in this document, or on the product
Symbol Signal word
DANGER!
CAUTION!
CAUTION!
NOTE
MULTIPLE
POWER SOURCES
EQUIPOTENTIALITY
STANDBY
DANGER!
Do not block the air vents which are located on the front panel of the
device, the internal temperature might increase and damage the
equipment.
Definition
Potentially dangerous situation which may lead to
personal injury or death! Follow the instructions
closely.
Caution, risk of electric shock.
Potential equipment damage or destruction!
Follow the instructions closely.
Tips and other useful or important information.
This equipment may contain more than one power
source: Disconnect all power supply cords before
removing the cover to avoid electric shock.
Identify the terminal(s) which, when connected
together, bring the various parts of the device to the
same potential, not necessarily being the earth
(ground) potential.
Identify the switch by means of which part of the
equipment is switched on in order to bring it into
the stand-by condition, and to identify the control
to shift to or to indicate the state of low power con-
sumption.
2.5 Safety Notes
15