Preventive Maintenance; Important Caution & Safety Instructions; General Instructions; Mechanical Inspection And Cleaning - Safran SATCORE Series User Manual

SATCORE SERIES
USER's MANUAL
4.1

PREVENTIVE MAINTENANCE

4.1.1 Important Caution & Safety Instructions
Refer to important safety instructions provided in Chassis User's manual in [RD4] of this document.
4.1.2

General instructions

4.1.2.1 Mechanical Inspection and Cleaning

It is recommended to take the following precautions to get the best performance from the system :
 Do not carry out any dust-producing work in the room housing the SATCORE. Keep clean all the air inputs to
avoid electronic components overheating.
 Use only alcohol or a water-based cleaner on the front and rear panels of equipment. Other solvents may
damage the keys, LCD and markings.
 Perform a regular operating check on the fan units (check for any abnormal temperature rise, check the air flow
at the air exhaust). The system is not designed for permanent operation without ventilation.

4.1.2.2 Handling Precautions

SOME OF THE HARDWARE COMPONENTS USE CMOS TECHNOLOGY AND CAN BE DAMAGED
BY ELECTROSTATIC DISCHARGE FROM YOUR CLOTHES OR BODY.
ALWAYS USE AN ANTI-STATIC BRACELET WHEN WORKING ON THE SATCORE.
 Never remove a board from the SATCORE.
 Please contact Zodiac Data Systems before any intervention on the chassis.

4.1.2.3 Wait after power off

It is recommended to wait for at least one minute to re-power on the chassis after power off.
ZODIAC DATA SYSTEMS PROPRIETARY
D102751
ZDS Ref :
WARNING:
Issue : 1 Rev.: 0
Date : July 11, 2019
Page 80