Interfaces; Gnss Receiver; 10 Mhz Output - Safran SecureSync 2400 Getting Started Manual

Altitude:
Shock and Vibration (Operating and Storage):
MIL-STD-810G: 500.6, 501.6, 502.6, 503.6, 507.6
MIL-STD-810H: 514.8, 516.8
1.4

Interfaces

The following specifications apply to the standard configuration of SecureSync. Inform-
ation on option card specifications can be found in the main user manual.
1.4.1

GNSS Receiver

Model: u-blox M8T
Compatible signals:
Satellites tracked: Up to 72 simultaneously
Update rate: up to 2Hz (concurrent)
Acquisition time: Typically < 27 seconds from cold start
Antenna requirements: Active antenna module, +5V, powered by SecureSync, 16 dB
gain minimum
Antenna connector: SMA (SMA to N-type conversion cable included in anxillary kit)
1.4.2

10 MHz Output

SecureSync 2400 Getting Started Guide Rev. 4
100-240 V
Operating:
up to 45000 ft (13716 m)
Storage range:
516.8 15g, 11 ms halfsine
Shock:
514.8C-2 cat 4 and 514.8D-11, cat 21 1.1 g rms vertical and 0.8 g rms
Vibration:
longitudinal
GPS L1 C/A Code transmissions at 1575.42 MHz
GLONASS L1 0F transmissions centered at 1602.0 MHz
Galileo E1 B/C transmissions at 1575.42 MHz
BeiDou B1 transmissions centered at 1561.098 MHz
QZSS L1-SAIF transmissions at 1575.42 MHz
Signal: 10 MHz sine wave
Level: +13 dBm ±2dB into 50 Ω
Signal
: up to 13120 ft (3999 m)
AC
1.4 Interfaces
9